Can Driveway Resurfacing Protect the Outdoor Surface?
When it comes to maintaining the driveway, the first thing you need to consider is the cost along with that you have to look which of the three is better: patching, refinishing, or simply replacing. Be it all concrete, asphalt, or brick, driveways always require a bit of an expenditure because its maintenance calls for laying a proper foundation at first. This had led to several homeowners refraining from undergoing the necessary fixing steps required for its maintenance. They instead fix the cracks and crumbles to avoid the expenses. However, this does not ensure complete protection of the driveway.
In addition, when you are thinking of patching or replacing the driveway, there are certain considerations. Nonetheless, everything concludes at what your preference says.
What Happens When You Seal Coat the Driveway?
Among cost effective driveway resurfacing, seal coating is the apt way of protecting your driveway from wear and tear prolonging the longevity of the driveway. Asphalt driveways are more susceptible to damage than concrete driveways due to the automobile traffic and the regular weather conditions.
When choosing to seal coat on an asphalt driveway, do not go for it right after its installation. A good wait of at least 2 years after the installation is recommended before going for a seal coating procedure. This helps prevent UV rays from penetrating to the base layer of the asphalt and inhibits potholes and cracks from developing and spreading. Though, seal coating is easy enough. However, seek a professional help for doing it, and never rule out the power-washing step. Do it every few years to maintain and improve the durability of your asphalt driveway.
Since concrete has a natural proneness to crack when water is allowed to seep through, it is only made worse with cars constantly driving up and down on it. When you regularly apply a driveway sealer to the concrete, it protects driveway from water, sunlight, and air to permeate through the layers and result in corrosive actions. In addition, driveway sealers also prevent oil spills and leaks from permeating the surface, which makes it easier to clean.
Taking Care of Driveway Surface Cracks
When you spot a crack in your driveway, fill it as soon as possible lest you should witness it spreading. Filling cracks is a crucial step in driveway resurfacing. You can find materials in any home-improvement stores. Nevertheless, contact your asphalt-paving contractor. As often, the cracks result out of an underlying problem. Check out the tips for looking after driveway cracks:
- Always try to deviate traffic from the affected area as cars regularly passing over the crack might lead to worsening the condition.
- Whenever you spot a crack in your driveway, as the first general rule remember to use seal coating or crack fillers to try to cease the damage.
- It is always best to rely on your paving contractor, as the crack might have generated from an underlying problem and without proper maintenance, your driveway could succumb to it.
What to Know About Pothole Patching
Cracks have a tendency to transform into potholes, which would need blacktop patching (also known as a cold patch). It is usually readymade asphalt packed into a bag. Before adding the cold patch in areas of deep depressions, potholes, and other such crumbling spaces, make sure to brush off the surface and dry it. A patch needs at least 24 hours of curing before being sealed.
Before deciding to deal with the constant patches or redoing the driveway consider driveway resurfacing, which implies taking the top driveway surface off only to replace it. This gives your driveway a completely new look at a fraction of the redoing price if there are not any foundation defects, deep cracks, and pits.